Cherry Peel & Stick Wood Veneer

Each sheet includes:

• 1x Peel & Stick Wood Veneer Sheet (24" x 48")
• Covers approximately 8 sq ft per sheet
• Pre-applied 3M pressure-sensitive adhesive backing
• Real wood face — not vinyl, not laminate
• 0.5mm thickness — thin enough to wrap edges, thick enough to sand and finish

It's as easy as peel, stick, trim:

1. Prep the surface — Clean, dry, and lightly sand for best adhesion.
2. Peel the backing — Start from one edge and slowly peel back the 3M adhesive liner.
3. Stick it down — Press firmly from center outward to avoid air bubbles. Use a roller or credit card to smooth.
4. Trim the edges — Use a sharp utility knife to trim excess. The veneer cuts clean.
5. Finish it — Sand lightly, stain, or seal with polyurethane for a custom look.

No contact cement. No heat gun. No mess. Most flippers finish a dresser top in under 15 minutes.

Shipping:

• Ships within 24 hours of ordering (Mon–Fri)
• 2–4 day delivery via USPS Priority or UPS Ground
• Free shipping on orders over $75
• Sheets ship flat in protective packaging to prevent damage

Returns:

• 30-day hassle-free returns on unused sheets
• If your veneer arrives damaged, we'll replace it — no questions asked
• Contact us at support@flipsupply.co for any issues

Get the best results on your flip:

• Best surfaces: Works great on flat or gently curved surfaces — dressers, tabletops, cabinet doors, shelves, and nightstands.
• Temperature matters: Apply in a room above 60°F for strongest adhesion.
• Maximize your sheet: Plan your cuts before peeling. One 24" x 48" sheet covers most dresser tops or 2–3 drawer fronts.
• Stack your profit: A worn dresser from Facebook Marketplace can flip for $300–$500+ with a fresh veneer finish. That's the kind of ROI that pays for your entire supply order.
• Seal it: One coat of water-based polyurethane gives a professional, durable finish buyers love.